Heavy Duty Brake Slack Adjuster Service Kit

Designed to fit on all major brands of both Manual and Automatic Self-Adjusting type slack adjusters. It also includes two brake clevis pin presses for quick removal of the clevis pins as the cotter pins are sheared off in the process.

Made to be used with a 3/4" impact too.

Includes

• 10406 Manual Slack Adjuster Puller
• 10407 Rockwell Slack Adjuster Puller
• 10409 Gunite/Brunner/Bendix Slack Adjuster Puller
• 10410 Haldex Slack Adjuster Puller
• 10501 Brake Clevis Pin Press
• 10502 Slack Adjuster Rod Pin Press
• Optional 10401 Low Profile Forcing Screw

10406 Manual Slack Adjuster Puller Application

Made of high strength steel casting designed for high capacity pulling and safely removes all makes and models of manual slack adjusters. Can be used with a 1/2" impact tool.

• Fits all makes and models of manual type slack adjusters. Max glove opening is 4.5"
• Simple to slip on for instant results

Tiger Tool Manual Slack Adjuster Puller 10406 (.23 Sec)

---

10407 Rockwell Slack Adjuster Puller Application

This tool fits virtually all Rockwell self-adjusting slack adjusters with a depth of 2.75". Can be used with a 1/2" impact tool. Made of high strength steel.

• Fits virtually all Rockwell self-adjusting slack adjusters with a depth of 2.75"
• Optional 10401 Low Profile Forcing Screw
• Note: Optional 10401 can be used with any of the Self-Adjusting Slack Adjuster Pullers (10407, 10409, 10410) where space is extremely limited.

Tiger Tool Rockwell Slack Adjuster Puller 10407 (.40 Sec)

---

10409 Gunite/Brunner/Bendix Slack Adjuster Puller Application

Can service virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters. Can be used with a 1/2" impact tool. Made of high grade steel.

• For all Gunite, Brunner and Bendix self-adjusting slack adjusters
• Eliminates dangerous hammering and cutting torch methods
• Simple to slip on for instant results.
• Optional 10401 Low Profile Forcing Screw
• Note: Optional 10401 can be used with any of the Self-Adjusting Slack Adjuster Pullers (10407, 10409, 10410) where space is extremely limited.

---

10410 Haldex Multi Adjustable Slack Adjuster Puller Application

This tool is adjustable. The new and improved design accommodates the removal of all Haldex self-adjusting slack adjusters including, left offset, right offset and standard elongated arm designs from either side. The arm length is 2.41" long. Can be used with a 1/2" impact tool. Made of high grade steel.

• Eliminates dangerous hammering and cutting torch methods
• Simple to slip on for instant results.
• Optional 10401 Low Profile Forcing Screw
• Note: Optional 10401 can be used with any of the Self-Adjusting Slack Adjuster Pullers (10407, 10409, 10410) where space is extremely limited.
• Note: Not compatible with Haldex Part# 40010306

---

10501 Brake Clevis Pin Press Application

Works on virtually all makes and models of truck and trailer slack adjuster brake clevises. Instantly shears off the cotter pin as the clevis pin is easily removed. The spring-loaded plunger positions itself automatically over the brake clevis pin.

• Fits virtually all makes and models of truck and trailer slack adjuster brake clevises
• Eliminates dangerous hammering and cutting torch methods
• Simple to slip on for instant results.
• Spring-loaded plunger positions itself automatically over the brake clevis pin

---

10502 Slack Adjuster Rod Pin Press Application

Will work on virtually all makes and models of automatic slack adjuster rod pins and the spring-loaded plunger positions itself automatically over the slack adjuster rod clevis pin. Instantly shears off the cotter pin allowing the 3/16" clevis pin to be easily removed. The internal height of the Slack Adjuster is 1 15/16", and the depth is 1 1/16".

• Eliminates dangerous hammering and cutting torch methods
• Simple to slip on for instant results.
• Spring-loaded plunger positions itself automatically over the brake clevis pin
• Fits virtually all makes and models of truck and trailer slack adjuster brake clevises