Heavy Duty Technician′s Tool Kit

Provides a variety of popular tools used for servicing driveline, steering and brake components on class 7 and 8 trucks and buses. The kit eliminates dangerous hammering and cutting torch methods.

20201 Kit20301 Kit20401 Kit

20201 Kit Includes

For Servicing U-Joints, Bearing Cups, Tie Rods & Slack Adjusters on class 7 and 8 trucks and buses. Service Manual & Rockwell Automatic Slack Adjusters

• 10102 Heavy Duty Universal Joint Puller
• 10201 Bearing Cup Installer – Traditional Bolt Retained
• 10301 7/8" Tie Rod End Remover
• 10406 Manual Slack Adjuster Puller
• 10407 Rockwell Automatic Slack Adjuster Puller
• Dimension: 6" W x 20.5" L x 17" H
• Weight: 32 lbs.

20301 Kit Includes

For Servicing U-Joints, Bearing Cups, Tie Rods, Slack Adjusters & Clevis Pins on class 7 and 8 trucks and buses. Service Manual & Clevis Pins.

• 10102 Heavy Duty Universal Joint Puller
• 10201 Bearing Cup Installer – Traditional Bolt Retained
• 10301 7/8" Tie Rod End Remover
• 10406 Manual Slack Adjuster Puller
• 10501 Brake Clevis Pin Press
• Dimension: 6" W x 20.5" L x 17" H
• Weight: 28.5 lbs.

20401 Kit Includes

For Servicing U-Joints, Bearing Cups, Tie Rods & Self Adjusting Slack Adjusters on class 7 and 8 trucks and buses. Service Gunite, Brunner, Bendix & Haldex self-adjusting Slack Adjusters.

• 10102 Heavy Duty Universal Joint Puller
• 10201 Bearing Cup Installer – Traditional Bolt Retained
• 10301 7/8" Tie Rod End Remover
• 10409 Gunite, Brunner and Bendix self-adjusting slack puller
• 10410 Haldex self-adjusting slack puller
• Dimension: 6" W x 20.5" L x 17" H
• Weight: 34 lbs.

10102 Heavy Duty U-Joint Puller Application

Provides ultimate strength for disassembling the most seized U-joints quickly and efficiently on virtually all Class 7 and 8 trucks and machinery. Eliminates dangerous vice-and-socket or hammering methods and reduces the risk of damage to driveshaft, yokes, joints or bearing cups. Can use 1" Impact Tool.

• U-Joints with bearing cups 1.5" to 2.2" O.D.
• Spicer 1610, 1710, 1760, 1810, 1880 Series
• Spicer SPL 140, 170, & 250 Life Series
• Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
• Meritor RPL 20, 25 Permalube Series

Heavy Duty U-Joint Puller- Tiger Tool 10102 (1.26 Min)

10201 Bolt-Retained Bearing Cup Installer Application

Install bearing cups quickly and accurately and without the use of a hammer eliminating frustrating dislocation of needle bearings, while also protecting surrounding components. Outside guide bolts are designed to ensure the bolt-retained bearing cup is accurately aligned. An impact or hand wrench is then applied to the forcing screw, which installs the new bearing cup in a snap.

• Spicer 1610 – 1880

Tiger Tool Bearing Cup Installer 10201 (1.44 Min)

10301 Tie Rod End Remover 7/8"

Provides a safe way to "shock" tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Made of high-grade steel with a black oxide finished coating that resists corrosion.

• Fits on tie rod end sizes of 7/8".

Tie Rod End Remover 10301,10302,10304,10306,10310 (.36 Sec)

10406 Manual Slack Adjuster Puller

Made of high strength steel casting designed for high capacity pulling and safely removes all makes and models of manual slack adjusters. Eliminates dangerous hammering and cutting torch methods. Can be used with a 1/2" impact tool.

• Fits virtually all makes and models of manual type slack adjusters.
• Max glove opening is 4.5″

Tiger Tool Manual Slack Adjuster Puller 10406 (.23 Sec)

10407 Rockwell Slack Adjuster Puller

This tool safely & efficiently removes virtually all Rockwell self-adjusting slack adjusters with a depth of 2.75". Eliminates dangerous hammering and cutting torch methods. Can be used with a 1/2" impact tool. Made of high strength steel.

• Fits virtually all Rockwell self-adjusting slack adjusters with a depth of 2.75".
• Optional 10401 Low Profile Forcing Screw

Tiger Tool Rockwell Slack Adjuster Puller 10407 (.40 Sec)

10501 Brake Clevis Pin Press

Works on virtually all makes and models of truck and trailer slack adjuster brake clevises. The spring-loaded plunger positions itself automatically over the brake clevis pin. Instantly shears off the cotter pin as the clevis pin is easily removed.

Tiger Tool Brake Clevis Pin Press 10501 (.53 Sec)

10409 Gunite/Brunner/Bendix Slack Adjuster Puller

Can service virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters safely. Can be used with a 1/2" impact tool. Made of high grade steel.

• Fits virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters.
• Optional 10401 Low Profile Forcing Screw

10410 Haldex Multi Adjustable Slack Adjuster Puller

This tool is adjustable. The new and improved design accommodates the removal of virtually all Haldex self-adjusting slack adjusters including, left offset, right offset and standard elongated arm designs from either side. The arm length is 2.41" long. Can be used with a 1/2" impact tool. Made of high grade steel. Not compatible with: Haldex Part# 40010306.

• Fits virtually all haldex self-adjusting slack adjusters including, left offset, right offset and standard elongated arm designs from either side
• The arm length is 2.41" long.
• Optional 10401 Low Profile Forcing Screw